Install Free Gold Price Widget!
Install Free Gold Price Widget!
Install Free Gold Price Widget!
|
- Valve adjustment really necessary? - Drive Accord Honda Forums
The only connection between timing belt change and valve adjustment is the valve cover which has to be loosened in order to remove the upper timing belt cover
- Why breaking in a barrel is NOT necessary - Snipers Hide
Re: Why "breaking in" a barrel is NOT necessary The reason that the barrels change velocit is the bore actualy work hardens and if you fire yout rifles at say 500 yards you can see an elevation shift somewhere around 50 to 80 rounds then they usualy settle down the reason to break in barrels is to smoth out the burs in the throat
- will honda dealer replace all necessary parts for timing. . .
The price I got was $1,500, which seems to be the average in the NY area I used a 10% service coupon, so the final cost was around $1,300 When I dropped off the car, I confirmed again that everything was being replaced, and they assured me it was a full kit with all necessary parts Today, when I picked up the vehicle, the invoice only listed:
- Honda Accord Forums - Drive Accord Honda Forums
On my 04 had valves adjusted @ 250K, 350K 450K Mechanic said adjustment not necessary unless they are making noise even though the Honda recommendation was to check them @ 120K Call some indy shops for prices, quality of job will depend on time spent doing the adjustment That dealer quote would be $200 hr 2 hrs
- Is flushing the coolant system necessary? - Drive Accord Honda Forums
I would not do a chemical flush but just a flush with a hose, while the water pump is off In my opinion using distilled water to flush is a bit overkill Also, insisting on Honda coolant is a fine but not necessary if you are flushing the whole system (be sure to get the heater core)
- Cantilevered mount necessary on Ar10? | Snipers Hide Forum
If you don't have a full length rail and are using a long scope like a NF NXS 5 5-22X50 or a Burris XTR II 5-25X50 or some thing similar you would need a cantilever mount to get the scope mounted with the proper eye relief Or you might be able to use a LaRue like the SPR If you have a full length rail the a cantilever mount is not necessary
- Is it really necessary to change the drain plug washer. . .
Some may say it's ok to do that, but I say it is foolish for the sake of a $ 35 washer to take any chances When the washer "crushes" at 30 lb-ft of torque it forms a leak-free seal and the drain bolt will not loo
- Is a S-VCM absolutely necessary for 9th gen V6?
I've been told I need to get an S-VCM module as soon as possible to disable vcm on my 9th gen due to uneven piston wear and generally extra wear being caused by the VCM However I've also read that those issues only pertain to the 8th gen and they were all resolved with the 9th gen Any
|
|
|