Install Free Gold Price Widget!
Install Free Gold Price Widget!
Install Free Gold Price Widget!
|
- Hornady 5. 56mm 55 Grain GMX TAP Barrier - Snipers Hide
Hornady’s 5 56mm 55 grain GMX TAP Barrier ammunition (#81255) uses the same 55 grain GMX projectile that is available as a reloading component The 55 grain GMX bullet is a monolithic hollow-point, but unlike similar monolithic bullets such as the all-copper Barnes TSX, the Hornady GMX is made from gilding metal (95% copper and 5% zinc)
- Hunting Fishing Barnes TSX vs. Hornady GMX - Snipers Hide
The new Hornady GMX bullet is made from guilding metal, not solid copper like the TSX I have noticed much less fouling with the GMX than the Barnes bullets If you run the Barnes in a fast caliber (magnum), then you will have copper fouling in as little as 15-20 rounds I have had good accuracy with the GMX, as well as the Barnes
- Hornady GMX 55gr 224” - Snipers Hide
Look at the title that you posted for this thread Then re-read what I actually wrote in my above post, "55 grain GMX 224" projectile," and then re-look at the picture of the actual 55 grain GMX 224" projectile that I posted The pictures that you posted are nothing but stock pictures from Hornady of larger caliber GMX projectiles
- Hornady GMX problems - help needed | Snipers Hide Forum
Re: Hornady GMX problems - help needed Well with my finding using GMX's, is that they have a secant design and are very sensitive to seating depth I have shot these GMX's out of 3 rifles and had great results, but they do require some time
- Hornady GMX 70gr. in . 223 and general monolithic reloading
I purchased three boxes of Hornady's 70gr monolithic bullets, the GMX series, only to discover that Hornady says they won't stabilize in a 1:8 twist barrel Unfortunately this is exactly what I have, 16" Wylde chamber, 1:8 twist in an auto-loader AR-15 I loaded five rounds, H335@23gr even just to see if I'd get keyholes at 100 yards Nada
- Hunting Fishing hornaday GMX vs SST bullets in 308 comparison
i have a goodly supply of hon factory 308 165gr ammo with the above bullets i am wondering if anyone here has direct comparable experience with both of these on game accuracy with my guns will be an issue bet they will be comparable there just wondering about actual experience with either
- Success with Barnes, Hornady or Nosler All copper Gilding Bullets in . . .
Greetings Gents, If you have had any success in load development for 308 with the Barnes, (TTSX, TSX, LRX 150, 165, 168) Hornady, (GMX 150 or 168) or the Nosler Etip in 150 or 168 please chime in and share your experiences in loading 308 Please include COAL I have been hit or miss with
- Range Report 6. 5 Creedmoor 120 GR GMX - Snipers Hide
The 120 GMX factory ammo was pretty hot, from the 22 5" barrel I shoot the bullets were passing the chrono avg 3075fps roughly, IMO that's pretty darn quick and I noted that the primers were somewhat flattened, definitely flatter than my known-to-be-warm 140Amax handload
|
|
|