Install Free Gold Price Widget!
Install Free Gold Price Widget!
Install Free Gold Price Widget!
|
- Can communication SMA to BYD HVS HVM | DIY Solar Power Forum
Can't directly help with HV, but I have data for BYD B-Box CAN to a GoodWe inverter (set to BYD comms) Status flags in 0x35A seem to be the same as SMA SunnyBoy So it's much the same as described by SMA without 0x35B and with 0x308 as an inverter heartbeat message
- Modbus on BYD LVS battery - DIY Solar Power Forum
my question is : does anybody controle and readout a BYD-homebattery using Modbus-TCP ? ANy link on the internet where I can find the proper modbus-registers ? Being new to Solar, my idea was to start by using existing of-the-shelf equipment : A Solaredge hybride invertor linked to a BYD LVS 8kWh battery Grid-connected
- BYD HVS DOD - DIY Solar Power Forum
I've got a BYD HVS battery system working with a Fronius Gen24 Primo Inverter The inverter battery management is set to auto which shows a operating range of 5%-100% (i e 95% DOD) I was wondering whether I should change to manual and set a DOD of 80% to extend the battery life The BYD technical data say 100% DOD is fine
- Inverters that support high voltage (500v) storage batteries
There are of course plug and play options, like the Pylontech H1 or BYD HVL that meet UL9540 In my case, I'm running the Seplos HItens ( pair in parallel for 40kwh ) just received with are half the cost of the UL9540 options The Hitens for the Solis S6 come in 10kwh, 15kwh and 20kwh options
- DIY BYD Blade Battery Pack 7. 066 kWh for $1,220 - DIY Solar Power Forum
CELL INFO Nominal Voltage: 3 2 Volts Battery Capacity: 138 Ah Watt-hours: 0 4416 kWh Dimensions: Length 960mm * Depth 14mm * Height 90mm ( Lenght 37 8 * Depth 0 55 * Height 3 54 inches ) Weight: 2 63 Kg ( 5 8 lbs ) Max continuous charge current: 1 5C Max continuous discharge current
- Need help info about CAN protocol from HV battery systems which . . .
I asked BYD and Pylon for the CAN HV protocol data No positive response Also i asked Deye about this My request needs to be approved (sigh) I’ve got a general document which i think Deye uses, but i can’t get it working The inverter does not recognize the data, maybe due to the fact i don't know if i implemented it correctly, and
- BYD 24V LiFePo4 Battery Modules | DIY Solar Power Forum
I am buying three of the BYD 24V battery modules, picking them up next week from batteryhookup store According to the specs, it works with standard 24V systems (I have a MPP Solar 24V Hybrid Charger Inverter so sounds perfect to me) NOMINAL VOLTAGE IS 25 6V FULLY CHARGED IS 29 2V FULLY
- REPT, EVE or CATL? | DIY Solar Power Forum
I'm looking for 15 or 30 kWh storage Current offer is for REPT 280Ah, EVE 304Ah and CATL 302Ah Can you, please, share some quick feedback on the different
|
|
|